Markets

Aerospace / Defence & Security – Electronic design

Product developments, from DAL-E up to DAL-A, are carried out following ARP 4754A, DO-178C, DO-254 and DO-160G guidelines, as well as the MIL-HDBK-217F safety & reliability guide and the FIDES guide.

A specific quality department is dedicated to R&D to ensure that internal processes, standards and DO are respected.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers have acquired specific knowledge on Aerospace, Defence & Security projects in the following technical fields:

  • power conversion and storage
  • power electronics
  • network & communication
  • radio-frequency
  • numerical electronics/ FPGA/ µC
  • embedded software
  • rugged computers
  • high temperature
  • ...

In addition to its skill in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

Product developments, from DAL-E up to DAL-A, are carried out following ARP 4754A, DO-178C, DO-254 and DO-160G guidelines, as well as the MIL-HDBK-217F safety & reliability guide and the FIDES guide.

A specific quality department is dedicated to R&D to ensure that internal processes, standards and DO are respected.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers have acquired specific knowledge on Aerospace, Defence & Security projects in the following technical fields:

  • power conversion and storage
  • power electronics
  • network & communication
  • radio-frequency
  • numerical electronics/ FPGA/ µC
  • embedded software
  • rugged computers
  • high temperature
  • ...

In addition to its skill in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

Electronic design for aerospace, aeronautics, defence and security
Electronic design for aerospace, aeronautics, defence and security

Aerospace / Defence & Security – Electronic prototyping

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

 

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

 

Electronic prototyping for aerospace, aeronautics, defence and security
Electronic prototyping for aerospace, aeronautics, defence and security

Aerospace / Defence & Security – Electronic industrialisation

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing) : analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing) : analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

Electronic industrialisation for aerospace, aeronautics, defence and security
Electronic industrialisation for aerospace, aeronautics, defence and security

Aerospace / Defence & Security – Assembly and testing

TRONICO has more than 40 years’ experience in electronic products and PCB assembly.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

> Link to TRONICO's Nadcap certifications

TRONICO has more than 40 years’ experience in electronic products and PCB assembly.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

> Link to TRONICO's Nadcap certifications

Electronic assembly and testing for aerospace, aeronautics, defence and security
Electronic assembly and testing for aerospace, aeronautics, defence and security

Aerospace / Defence & Security – Best-cost manufacturing

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Electronics best-cost manufacturing for aerospace, aeronautics, defence and security
Electronics best-cost manufacturing for aerospace, aeronautics, defence and security

Aerospace / Defence & Security – Maintainability in Operational Conditions

The lifetime of an aircraft can be over 30 years, however the electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offers global solutions of MOC (Maintaining in Operational Conditions):

The lifetime of an aircraft can be over 30 years, however the electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offers global solutions of MOC (Maintaining in Operational Conditions):

Electronic maintainability in Operational Conditions for aerospace, aeronautics, defence and security
Electronic maintainability in Operational Conditions for aerospace, aeronautics, defence and security

Aerospace / Defence & Security – Test benches

The compliance of aeronautical electronic equipment is guaranteed by the tests they undergo during the manufacturing process.

By combining production tests with a final functional test, TRONICO offers an optimal test strategy for each electronic product. In order to answer to this last step of the production cycle, TRONICO designs, integrates and put in service automatic test equipment.

Based on a test specification from its own design office or from its customers’, TRONICO will define an architecture, select the test devices, develop an ergonomic HMI (Human-Machine Interface), integrate the equipment and the test interface (connectors or nail bed). TRONICO also provides training to operators, maintenance and repair.

Keeping in mind the economic constraint of the project, the modular architecture of TRONICO’s test equipment gives the possibility to test several boards or built boxes on the same equipment. In addition, the automation of the test sequences up to the issuance of the test report simplifies and rationalizes the daily use of the test bench by the operator.

The compliance of aeronautical electronic equipment is guaranteed by the tests they undergo during the manufacturing process.

By combining production tests with a final functional test, TRONICO offers an optimal test strategy for each electronic product. In order to answer to this last step of the production cycle, TRONICO designs, integrates and put in service automatic test equipment.

Based on a test specification from its own design office or from its customers’, TRONICO will define an architecture, select the test devices, develop an ergonomic HMI (Human-Machine Interface), integrate the equipment and the test interface (connectors or nail bed). TRONICO also provides training to operators, maintenance and repair.

Keeping in mind the economic constraint of the project, the modular architecture of TRONICO’s test equipment gives the possibility to test several boards or built boxes on the same equipment. In addition, the automation of the test sequences up to the issuance of the test report simplifies and rationalizes the daily use of the test bench by the operator.

test benches for aeronautical electronic equipment TRONICO
test benches for aeronautical electronic equipment TRONICO

Aerospace / Defence & Security – The More Electrical Aircraft

TRONICO is involved in the process of making the aircraft of tomorrow more electric. TRONICO is involved in several research projects aiming to transform hydraulic, pneumatic or thermal systems into electrical ones. The goal of this power transformation is to gain weight with the rationalization of a unique power source: electricity. However, electrical systems require a better power management through the optimization of its conversion, its storage and its efficiency.

TRONICO is thus part of this technological transformation with 3 types of products:

  • Power converters,
  • Battery management systems,
  • Electronics for actuators.

The common challenges for these systems are: efficiency, mass, temperature and density.

Aware that today's innovations will make aircrafts of tomorrow, TRONICO continues to develop these technologies through partnerships and collaborative projects.

> Know more about "Electrical System Evolution"

TRONICO is involved in the process of making the aircraft of tomorrow more electric. TRONICO is involved in several research projects aiming to transform hydraulic, pneumatic or thermal systems into electrical ones. The goal of this power transformation is to gain weight with the rationalization of a unique power source: electricity. However, electrical systems require a better power management through the optimization of its conversion, its storage and its efficiency.

TRONICO is thus part of this technological transformation with 3 types of products:

  • Power converters,
  • Battery management systems,
  • Electronics for actuators.

The common challenges for these systems are: efficiency, mass, temperature and density.

Aware that today's innovations will make aircrafts of tomorrow, TRONICO continues to develop these technologies through partnerships and collaborative projects.

> Know more about "Electrical System Evolution"

TRONICO's contribution to more electrical aircraft
TRONICO's contribution to more electrical aircraft

Aerospace / Defence & Security – Power converter

TRONICO combines its experience in power conversion with its patented flip chip attach technology (HEXAT®) and its partnership with the G2ELab (scientific poster) to provide innovative and compatible solutions for increasing power density challenge required by tomorrow's more electric aircraft challenges.

From a few watts to several tens of kilowatts, TRONICO’s expertise covers a wide range of power ratings for many applications.

> Know more about TRONICO's converters

TRONICO combines its experience in power conversion with its patented flip chip attach technology (HEXAT®) and its partnership with the G2ELab (scientific poster) to provide innovative and compatible solutions for increasing power density challenge required by tomorrow's more electric aircraft challenges.

From a few watts to several tens of kilowatts, TRONICO’s expertise covers a wide range of power ratings for many applications.

> Know more about TRONICO's converters

TRONICO's power converter
TRONICO's power converter

Aerospace / Defence & Security – Battery Management System

One of the main challenges of the more electrical plane concerns the storage of the required energy. The MEA (More Electrical Aircraft) or FEA (Full Electrical Aircraft) will consume more electric power than a conventional aircraft of today. With the Boeing 787 and AIRBUS A350, a first technological step has been crossed with the use of lithium-ion batteries.

TRONICO has developed a BMS (Battery Management System) modular platform for Lithium-based systems. Our BMS is a combination of a BMU (Battery Management Unit) which supervises communicates and a CSU (Cells Survey Unit) which monitors the battery cells.

Application engineers are available to study all specific requirements and customize the system to each need.

> Know more about Tame-Power® BMS

One of the main challenges of the more electrical plane concerns the storage of the required energy. The MEA (More Electrical Aircraft) or FEA (Full Electrical Aircraft) will consume more electric power than a conventional aircraft of today. With the Boeing 787 and AIRBUS A350, a first technological step has been crossed with the use of lithium-ion batteries.

TRONICO has developed a BMS (Battery Management System) modular platform for Lithium-based systems. Our BMS is a combination of a BMU (Battery Management Unit) which supervises communicates and a CSU (Cells Survey Unit) which monitors the battery cells.

Application engineers are available to study all specific requirements and customize the system to each need.

> Know more about Tame-Power® BMS

TRONICO's battery management system
TRONICO's battery management system

Aerospace / Defence & Security – Collaborative Projects

Stratobus

TRONICO has been selected by Thales Alenia Space as a partner to develop and realize the global power conversion and the wiring of the stratospheric airship. The company will provide innovative solutions for the power conversion and more specifically on the weight/power optimization.

Cleansky2

TRONICO is a partner for the development of a specific airborne equipment able to monitor the air quality (ozone and volatile organic compounds). The project consists in creating and industrialising a solution based on micro-analysers of several polluting gas which can be found in the aircraft cabin.

Stratobus

TRONICO has been selected by Thales Alenia Space as a partner to develop and realize the global power conversion and the wiring of the stratospheric airship. The company will provide innovative solutions for the power conversion and more specifically on the weight/power optimization.

Cleansky2

TRONICO is a partner for the development of a specific airborne equipment able to monitor the air quality (ozone and volatile organic compounds). The project consists in creating and industrialising a solution based on micro-analysers of several polluting gas which can be found in the aircraft cabin.

Collaborative projects for aerospace, aeronautics, defence and security
Collaborative projects for aerospace, aeronautics, defence and security

Medical – Electronic design

TRONICO develops class I, IIa and IIb medical devices: non-invasive devices, diagnosis instruments, invasive devices, surgical implants.

Product developments are made according to ISO 10993, ISO 14155, ISO 14971, EN 60601 and EN62304. A specific quality department is dedicated to ensure the respect of internal process and accreditations. TRONICO is able to handle the accreditation of its customer’s devices.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety).

TRONICO’s engineers acquired specific knowledge in the following technical fields:

  • power conversion and storage
  • power electronics
  • network & communication
  • radio-frequency
  • numerical electronics/ FPGA/ µC
  • embedded software
  • rugged computers
  • high temperature
  • ...

In addition to its skill in terms of electronics and mechanical development, TRONICO has internal means for layout rooting as well as automatic test benches realization.

TRONICO develops class I, IIa and IIb medical devices: non-invasive devices, diagnosis instruments, invasive devices, surgical implants.

Product developments are made according to ISO 10993, ISO 14155, ISO 14971, EN 60601 and EN62304. A specific quality department is dedicated to ensure the respect of internal process and accreditations. TRONICO is able to handle the accreditation of its customer’s devices.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety).

TRONICO’s engineers acquired specific knowledge in the following technical fields:

  • power conversion and storage
  • power electronics
  • network & communication
  • radio-frequency
  • numerical electronics/ FPGA/ µC
  • embedded software
  • rugged computers
  • high temperature
  • ...

In addition to its skill in terms of electronics and mechanical development, TRONICO has internal means for layout rooting as well as automatic test benches realization.

Electronic design for medical applications
Electronic design for medical applications

Medical – Electronic prototyping

As a partner in innovation projects, TRONICO offers two kinds of short time manufacturing thanks to a dedicated unit:

  • Proof of concept (POC) and mock-up
  • Prototypes

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

As a partner in innovation projects, TRONICO offers two kinds of short time manufacturing thanks to a dedicated unit:

  • Proof of concept (POC) and mock-up
  • Prototypes

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

Electronic prototyping for medical applications
Electronic prototyping for medical applications

Medical – Electronic industrialisation

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

Electronic industrialisation for medical applications
Electronic industrialisation for medical applications

Medical – Assembly and testing

TRONICO has more than 40 years’ experience in electronic products and PCB assembly. This specific know-how of electronic system manufacturing is used to realize extremely complex devices while guaranteeing high quality and traceability in compliance with the product requirements.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

TRONICO has more than 40 years’ experience in electronic products and PCB assembly. This specific know-how of electronic system manufacturing is used to realize extremely complex devices while guaranteeing high quality and traceability in compliance with the product requirements.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

Electronic assembly and testing for medical applications
Electronic assembly and testing for medical applications

Medical – Best-cost manufacturing

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Electronic best-cost manufacturing for medical applications
Electronic best-cost manufacturing for medical applications

Medical – Maintainability in Operational Conditions

To allow long term use of a product or an equipment (5 to 20 years, or even more), TRONICO offers global solutions. These solutions include:

To allow long term use of a product or an equipment (5 to 20 years, or even more), TRONICO offers global solutions. These solutions include:

Maintainability in Operational Conditions
Maintainability in Operational Conditions

Medical – Components engineering

TRONICO commits to continuous improvement and reliability of electronic components through its internal components testing laboratory accredited COFRAC. This global commitment leans on:

TRONICO commits to continuous improvement and reliability of electronic components through its internal components testing laboratory accredited COFRAC. This global commitment leans on:

Electronic components engineering for medical applications
Electronic components engineering for medical applications

Biotechnology – Electronic Design

Product developments, from SIL 1 to SIL 4, can be achieved using the FIDES guide and in respect of CEI 61508 standard. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety).

TRONICO’s engineers have acquired specific knowledge on biotechnology projects in the following technical fields:

  • Metrology and its analysis
  • data analysis and database
  • statistical analysis
  • radio-frequency
  • numerical electronics/ FPGA/ µC
  • communication & network
  • ...

In addition to its skill in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

Product developments, from SIL 1 to SIL 4, can be achieved using the FIDES guide and in respect of CEI 61508 standard. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety).

TRONICO’s engineers have acquired specific knowledge on biotechnology projects in the following technical fields:

  • Metrology and its analysis
  • data analysis and database
  • statistical analysis
  • radio-frequency
  • numerical electronics/ FPGA/ µC
  • communication & network
  • ...

In addition to its skill in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

Electronic design for biotechnology applications
Electronic design for biotechnology applications

Biotechnology – Electronic prototyping

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

Electronic prototyping for biotechnology applications
Electronic prototyping for biotechnology applications

Biotechnology – Electronic industrialisation

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

Electronic industrialisation for biotechnology applications
Electronic industrialisation for biotechnology applications

Biotechnology – Assembly and testing

TRONICO has more than 40 years’ experience in electronic products and PCB assembly..

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

TRONICO has more than 40 years’ experience in electronic products and PCB assembly..

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

Electronic assembly and testing for biotechnology applications
Electronic assembly and testing for biotechnology applications

Biotechnology – Best-cost manufacturing

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Electronic best-cost manufacturing for biotechnology applications
Electronic best-cost manufacturing for biotechnology applications

Biotechnology – Maintainability in Operational Conditions

To allow long term use of a product or an equipment (5 to 20 years, or even more), TRONICO offers global solutions. These solutions include:

To allow long term use of a product or an equipment (5 to 20 years, or even more), TRONICO offers global solutions. These solutions include:

Electronic maintainability in operational conditions
Electronic maintainability in operational conditions

Biotechnology – TRONICO’s offer

TRONICO answers to its customers’ needs for biotechnology solutions with three offers:

  • Developing  products : TRONICO integrates its customers’ technologies in specific products and equipment that the company will design, industrialize and manufacture
  • Developing a dedicated solution which answers a metrologic need for a product or a process characterization
    TRONICO masters technologies (spectroscopy – Raman, IR…- or microbiologic analysis) allowing it to characterize the evolution of a product state (solid, gaseous or liquid)  to control its toxicity, its temporal evolution, its fermentation, its composition, etc.

Elaborating collaborative projects combining its customers’ know-how with TRONICO’s technologies to develop innovative applications.

TRONICO answers to its customers’ needs for biotechnology solutions with three offers:

  • Developing  products : TRONICO integrates its customers’ technologies in specific products and equipment that the company will design, industrialize and manufacture
  • Developing a dedicated solution which answers a metrologic need for a product or a process characterization
    TRONICO masters technologies (spectroscopy – Raman, IR…- or microbiologic analysis) allowing it to characterize the evolution of a product state (solid, gaseous or liquid)  to control its toxicity, its temporal evolution, its fermentation, its composition, etc.

Elaborating collaborative projects combining its customers’ know-how with TRONICO’s technologies to develop innovative applications.

TRONICO's offer for biotechnology applications
TRONICO's offer for biotechnology applications

Biotechnology – Success stories

TRONICO has brought its innovative solutions for the following applications:

  • Molecule biodegrability : development of an miniaturized automated measurement tool to analyse molecule biodegrability
  • Bird eggs sexing : development of a non-invasive technic to foresee the bird’s gender during the incubation phase
  • Water toxicity analysis : development of biosensors and an embedded system to analyse water toxicity
  • Air toxicity analysis: development of a micro analyser to measure the VOC level (volatile organic compounds) in the air

TRONICO has brought its innovative solutions for the following applications:

  • Molecule biodegrability : development of an miniaturized automated measurement tool to analyse molecule biodegrability
  • Bird eggs sexing : development of a non-invasive technic to foresee the bird’s gender during the incubation phase
  • Water toxicity analysis : development of biosensors and an embedded system to analyse water toxicity
  • Air toxicity analysis: development of a micro analyser to measure the VOC level (volatile organic compounds) in the air
TRONICO's success stories for biotechnology applications
TRONICO's success stories for biotechnology applications

Biotechnology – Collaborative projects

TRONICO has acquired throughout the years a specific experience in the elaboration of collaborative projects (FUI, H2020, governmental grants…), which has enabled it to become a preferred partner and/or a leader of collaborative projects. Its commitment in different competitiveness clusters and its collaboration with important partners (Universities, CNRS…) foster synergies in order to create new products, services or process. 

The knowledge acquired during these projects allows TRONICO to strengthen its position as of the major player in the integration of biotechnology electronic systems with high added value.

TRONICO has acquired throughout the years a specific experience in the elaboration of collaborative projects (FUI, H2020, governmental grants…), which has enabled it to become a preferred partner and/or a leader of collaborative projects. Its commitment in different competitiveness clusters and its collaboration with important partners (Universities, CNRS…) foster synergies in order to create new products, services or process. 

The knowledge acquired during these projects allows TRONICO to strengthen its position as of the major player in the integration of biotechnology electronic systems with high added value.

Collaborative projects for biotechnology applications
Collaborative projects for biotechnology applications

Biotechnology – LabCom RIMAE

In order to promote the public/private collaboration and to carry out innovative projects in the field of biotechnologies, the shared laboratory called RIMAE was created (French for: research and industrialisation of environment applied measurement). RIMAE aims at developing and industrializing biosensors capable of measuring toxicity effects of chemical compounds.

RIMAE partners (Nantes University – UMR CNRS, TRONICO and TRONICO VIGICELL) supply solutions in the field of bioprocess and for biological products to answer industrial needs.

> More information on GEPEA laboratory of l’Université de Nantes (www.gepea.fr)

> More information on TRONICO VIGICELL (www.vigicell.fr)

In order to promote the public/private collaboration and to carry out innovative projects in the field of biotechnologies, the shared laboratory called RIMAE was created (French for: research and industrialisation of environment applied measurement). RIMAE aims at developing and industrializing biosensors capable of measuring toxicity effects of chemical compounds.

RIMAE partners (Nantes University – UMR CNRS, TRONICO and TRONICO VIGICELL) supply solutions in the field of bioprocess and for biological products to answer industrial needs.

> More information on GEPEA laboratory of l’Université de Nantes (www.gepea.fr)

> More information on TRONICO VIGICELL (www.vigicell.fr)

LabCom RIMAE
LabCom RIMAE

Energy – Electronic Design

Product development, from SIL 1 to SIL 4, can be achieved using FIDES guide and in respect of CEI 61508 norm. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers acquired specific knowledge on energy projects in the following technical fields:

  • power electronics
  • storage and conversion
  • electromagnetism
  • optoelectronics
  • communication & network
  • radio-frequency
  • mechanical
  • numerical electronics/ FPGA/ µC
  • embedded electronics

As well as specific know-how applied to constraints and specific applications:

  • harsh environment
  • safety & reliability
  • highly reliable electronic design
  • high temperature
  • respect of standards and norms...

In addition to its know-how in terms of electronics and mechanical development, TRONICO has internal means for rooting and automatic test benches realization.

Product development, from SIL 1 to SIL 4, can be achieved using FIDES guide and in respect of CEI 61508 norm. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers acquired specific knowledge on energy projects in the following technical fields:

  • power electronics
  • storage and conversion
  • electromagnetism
  • optoelectronics
  • communication & network
  • radio-frequency
  • mechanical
  • numerical electronics/ FPGA/ µC
  • embedded electronics

As well as specific know-how applied to constraints and specific applications:

  • harsh environment
  • safety & reliability
  • highly reliable electronic design
  • high temperature
  • respect of standards and norms...

In addition to its know-how in terms of electronics and mechanical development, TRONICO has internal means for rooting and automatic test benches realization.

Electronic design for oil & gas, nuclear and renewable energy
Electronic design for oil & gas, nuclear and renewable energy

Energy – Electronic prototyping

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

Electronic prototyping for oil & gas, nuclear and renewable energy
Electronic prototyping for oil & gas, nuclear and renewable energy

Energy – Electronic industrialisation

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

Electronic industrialisation for oil & gas, nuclear and renewable energy
Electronic industrialisation for oil & gas, nuclear and renewable energy

Energy – Assembly and testing

TRONICO has more than 40 years’ experience in electronic products and PCB assembly..

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

TRONICO has more than 40 years’ experience in electronic products and PCB assembly..

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

Electronic assembly and testing for oil & gas, nuclear and renewable energy
Electronic assembly and testing for oil & gas, nuclear and renewable energy

Energy – Best-cost manufacturing

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Electronic best-cost manufacturing for oil & gas, nuclear and renewable energy
Electronic best-cost manufacturing for oil & gas, nuclear and renewable energy

Energy – Maintainability in Operational Conditions

Equipment service life is longer and longer (some can last over a decade), however electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offers global solutions of MOC (Maintaining in Operational Conditions):

Equipment service life is longer and longer (some can last over a decade), however electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offers global solutions of MOC (Maintaining in Operational Conditions):

Maintainability in operational conditions for oil & gas, nuclear and renewable energy
Maintainability in operational conditions for oil & gas, nuclear and renewable energy

Energy – Power converter

TRONICO develops, realizes and commercializes a product line of highly performant power conversion solutions. This product line is regrouped under the brand: TAME-POWER®. These solutions apply to embedded and stationary systems from a few Watts up to 500kW by combining converters.

The reference designs of each converter can be set up depending of the desired optimization criteria: range of current and voltage, power, efficiency, industrial price, the form factor, etc.

Engineers remain available to analyse each enquiry.

> Access TRONICO’s online converter catalogue

TRONICO develops, realizes and commercializes a product line of highly performant power conversion solutions. This product line is regrouped under the brand: TAME-POWER®. These solutions apply to embedded and stationary systems from a few Watts up to 500kW by combining converters.

The reference designs of each converter can be set up depending of the desired optimization criteria: range of current and voltage, power, efficiency, industrial price, the form factor, etc.

Engineers remain available to analyse each enquiry.

> Access TRONICO’s online converter catalogue

TRONICO's power converter
TRONICO's power converter

Energy – Battery Management System

TRONICO masters the design and manufacturing of BMS in compliance with safety and security standards NF-EN61508 and SIL2.

TRONICO holds a BMS configurable platform for complex systems application:

  • Up to 36 groups of 12 cells
  • Depending on the technology used  (Li-ion, Li-Po, Li-Fe-Ph)
  • Depending on the application and needs (voltage, topology, etc.…)

TRONICO’s BMS have a communication bus CAN2.0 as well as an embedded web server.

> Know more about TRONICO’s BMS

TRONICO masters the design and manufacturing of BMS in compliance with safety and security standards NF-EN61508 and SIL2.

TRONICO holds a BMS configurable platform for complex systems application:

  • Up to 36 groups of 12 cells
  • Depending on the technology used  (Li-ion, Li-Po, Li-Fe-Ph)
  • Depending on the application and needs (voltage, topology, etc.…)

TRONICO’s BMS have a communication bus CAN2.0 as well as an embedded web server.

> Know more about TRONICO’s BMS

Battery management system for oil & gas, nuclear and renewable energy
Battery management system for oil & gas, nuclear and renewable energy

Energy – Batteries emulator

TRONICO designs and produces testing solutions to ruggedize its customer’s BMS. These test benches are fully customizable and allow its user to emulate up to 136 different cells and therefore to validate and to perfect the BMS algorithms. 

The emulator has two functions, required for batteries:

  • Voltage generation (up to 15V)
  • Very precise voltage measure

These products have been developed to test the application of the batteries without having to manipulate them. They can also be used for other applications, such as:

  • Fuel Cell monitoring/simulator
  • Low voltage data acquisition centre
  • Low voltage generation with high precision.

TRONICO designs and produces testing solutions to ruggedize its customer’s BMS. These test benches are fully customizable and allow its user to emulate up to 136 different cells and therefore to validate and to perfect the BMS algorithms. 

The emulator has two functions, required for batteries:

  • Voltage generation (up to 15V)
  • Very precise voltage measure

These products have been developed to test the application of the batteries without having to manipulate them. They can also be used for other applications, such as:

  • Fuel Cell monitoring/simulator
  • Low voltage data acquisition centre
  • Low voltage generation with high precision.
Batteries emulator for oil & gas, nuclear and renewable energy | TRONICO
Batteries emulator for oil & gas, nuclear and renewable energy | TRONICO

Energy – Collaborative projects

TRONICO has acquired throughout the years a specific experience in the elaboration of collaborative projects (FUI, H2020, governmental grants…), which has unabled it to become a preferred partner and/or a leader of collaborative projects. Its commitment in different competitiveness clusters and its collaboration with important partners (Universities, CNRS…) foster synergies in order to create new products, services or process. 

TRONICO takes part in a number of innovative collaborative projects in the field of energy conversion, as a leader or as a partner:

HyTrac project

The HyTrac project (competitiveness cluster) gathers together the best French specialists in hydrogen technologies to propose a complete electro-hydrogen solution. This solution is mastered from the green energy contract, the local production of hydrogen using electrolysis up to the different parts embedded on the vehicle. This project targets stationary vehicle fleet from 100 to 300 kW.

TRONICO handles the energy conversion. The Hydrogen Mobility applications are a privileged development strategy for TRONICO which has established itself as the « Electronic French expert of hydrogen”.

ELITE project

The ELITE consortium brings together a truck manufacturer, a power electronics laboratory and TRONICO to elaborate an innovative solution to power-up all the vehicle functions except its traction system.

Road project

The « ROAD » collaborative project provides upgrades in several areas to refrigerated trucks. TRONICO realizes the different functions surrounding the autonomous embedded energy generation system.

TRONICO has acquired throughout the years a specific experience in the elaboration of collaborative projects (FUI, H2020, governmental grants…), which has unabled it to become a preferred partner and/or a leader of collaborative projects. Its commitment in different competitiveness clusters and its collaboration with important partners (Universities, CNRS…) foster synergies in order to create new products, services or process. 

TRONICO takes part in a number of innovative collaborative projects in the field of energy conversion, as a leader or as a partner:

HyTrac project

The HyTrac project (competitiveness cluster) gathers together the best French specialists in hydrogen technologies to propose a complete electro-hydrogen solution. This solution is mastered from the green energy contract, the local production of hydrogen using electrolysis up to the different parts embedded on the vehicle. This project targets stationary vehicle fleet from 100 to 300 kW.

TRONICO handles the energy conversion. The Hydrogen Mobility applications are a privileged development strategy for TRONICO which has established itself as the « Electronic French expert of hydrogen”.

ELITE project

The ELITE consortium brings together a truck manufacturer, a power electronics laboratory and TRONICO to elaborate an innovative solution to power-up all the vehicle functions except its traction system.

Road project

The « ROAD » collaborative project provides upgrades in several areas to refrigerated trucks. TRONICO realizes the different functions surrounding the autonomous embedded energy generation system.

Collaborative projects for oil & gas, nuclear and renewable energy | TRONICO
Collaborative projects for oil & gas, nuclear and renewable energy | TRONICO

Transport – Electronic Design

Product developments, from SIL 0 to SIL 4, can be achieved using the FIDES guide and in respect of EN 50126, EN 50128 and EN 50129 standard. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers have acquired specific knowledge on transport markets in the following technical fields:

  • power electronics
  • power conversion and storage
  • optoelectronics
  • communication & network
  • radio-frequency
  • mechanical
  • numerical electronics/ FPGA/ µC
  • embedded electronics

In addition to its know-how in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

Product developments, from SIL 0 to SIL 4, can be achieved using the FIDES guide and in respect of EN 50126, EN 50128 and EN 50129 standard. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers have acquired specific knowledge on transport markets in the following technical fields:

  • power electronics
  • power conversion and storage
  • optoelectronics
  • communication & network
  • radio-frequency
  • mechanical
  • numerical electronics/ FPGA/ µC
  • embedded electronics

In addition to its know-how in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

Transport – Electronic prototyping

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

 

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means.

 

Transport – Electronic industrialisation

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

Transport – Assembly and testing

TRONICO has more than 40 years’ experience in electronic products and PCB assembly.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

TRONICO has more than 40 years’ experience in electronic products and PCB assembly.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

Transport – Best-cost manufacturing

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Transport – Maintainability in Operational Conditions

Equipment lifetime is longer and longer (some can last over 30 years), however electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offer global solutions of MOC (Maintaining in Operational Conditions):

Equipment lifetime is longer and longer (some can last over 30 years), however electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offer global solutions of MOC (Maintaining in Operational Conditions):

Transport – TRONICO's products

Power converter

TRONICO develops, realizes and commercializes a product line of highly performant power conversion solutions. This product line is regrouped under the brand: TAMEPOWER®. These solutions apply to embedded and stationary systems from a few Watts up to 500kW by combining converters.

> Know more about TRONICO’s power converter

 

BMS (Battery Management System)

TRONICO masters the design and manufacturing of BMS in compliance with safety and security norms NF-EN61508 and SIL2.

TRONICO’s BMS have a communication bus CAN2.0 as well as an embedded web server.

> Know more about TRONICO’s BMS

Power converter

TRONICO develops, realizes and commercializes a product line of highly performant power conversion solutions. This product line is regrouped under the brand: TAMEPOWER®. These solutions apply to embedded and stationary systems from a few Watts up to 500kW by combining converters.

> Know more about TRONICO’s power converter

 

BMS (Battery Management System)

TRONICO masters the design and manufacturing of BMS in compliance with safety and security norms NF-EN61508 and SIL2.

TRONICO’s BMS have a communication bus CAN2.0 as well as an embedded web server.

> Know more about TRONICO’s BMS

Transport – Research and testing of obsolete electronic components

TRONICO monitors and looks for obsolete electronic components in a product nomenclature all over the world. 

These component batches are quite often bought  from specific brokers; it is thus necessary to guarantee their reliability. The components laboratory of TRONICO performs  tests to ensure their proper functions.

After these tests electronic components can be assembled in an electronic system.

TRONICO monitors and looks for obsolete electronic components in a product nomenclature all over the world. 

These component batches are quite often bought  from specific brokers; it is thus necessary to guarantee their reliability. The components laboratory of TRONICO performs  tests to ensure their proper functions.

After these tests electronic components can be assembled in an electronic system.

Industry – Electronic Design

Product development, from SIL 1 to SIL 4, can be achieved using FIDES guide and in respect of CEI 61508 norm. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers acquired specific knowledge on industrial projects in the following technical fields:

  • power electronics
  • low consuming electronic
  • power storage and conversion
  • sensors
  • signal treatment
  • optoelectronics
  • communication & network
  • radio-frequency
  • mechanical
  • numerical electronics/ FPGA/ µC
  • embedded electronics
  • microelectronics

The globalization of its skills enables TRONICO to answer to varied applications: industrial tooling, robotics, farm machinery, construction, IoT, etc.…

In addition to its know-how in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

TRONICO is also able to handle the specific certification for each product (CE, UL, TÜV...).

Product development, from SIL 1 to SIL 4, can be achieved using FIDES guide and in respect of CEI 61508 norm. A specific quality department is dedicated to ensure the respect of internal process and accreditations.

Experienced teams develop and analyse products to reach and maintain requirements regarding Safety & Reliability (RMAS: reliability, maintainability, availability, safety). TRONICO’s engineers acquired specific knowledge on industrial projects in the following technical fields:

  • power electronics
  • low consuming electronic
  • power storage and conversion
  • sensors
  • signal treatment
  • optoelectronics
  • communication & network
  • radio-frequency
  • mechanical
  • numerical electronics/ FPGA/ µC
  • embedded electronics
  • microelectronics

The globalization of its skills enables TRONICO to answer to varied applications: industrial tooling, robotics, farm machinery, construction, IoT, etc.…

In addition to its know-how in terms of electronics and mechanical development, TRONICO has internal means for layout and rooting as well as automatic test benches realization.

TRONICO is also able to handle the specific certification for each product (CE, UL, TÜV...).

Electronic design for the industry sector
Electronic design for the industry sector

Industry – Electronic prototyping

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means. 

 

TRONICO is organized with a specific « prototype » team, which enables it to provide quick manufacturing capability. It provides an expertise regarding purchasing and manufacturing to guarantee reliable and sustainable solutions.

The « prototype » team leans on experienced workers dedicated to this task and led by a prototype coordinator which regroups and handles the customer’s needs and matches them according to industrial constraints.

This “prototype” team disposes of identical and independent production means. 

 

Electronic prototyping for the industry sector
Electronic prototyping for the industry sector

Industry – Electronic industrialisation

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

The industrialisation process involves searching and analysing reliable and sustainable solutions to optimise circuit board manufacturing. Industrialisation service facilitates and handles the progress from prototypes to production runs. Industrialisation is integrated from the start of a project to optimize short, medium and long-term production costs.

Industrialisation optimises production and consists of the following elements:

  • Purchasing/supply FMECA*: used by TRONICO to handle the risks and obsolescence
  • Process FMECA*: used by TRONICO to handle processing risks
  • DfX:
    • DfM (Design for Manufacturing): analysis of  the manufacturability of the boards and their integration
    • DfT (Design for Test): defining and optimizing the test strategy
  • Design to cost: design methodology to optimise product cost

(*Failure Modes, Effects and Criticality Analysis).

Electronic industrialisation for the industry sector
Electronic industrialisation for the industry sector

Industry – Assembly and testing

Electronic products and PCB Assembly is TRONICO’s core business for more than 40 years.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

Electronic products and PCB Assembly is TRONICO’s core business for more than 40 years.

To do so, TRONICO leans on specific manufacturing means dedicated to electronic systems realization (SMD lines, wave soldering, X-ray, AOI…).

In addition to its manufacturing capability, TRONICO offers a full range of testing solutions (flying probes, ICT, thermal shocking, vibrations, functional testing…). Testing scope is elaborated to provide a permanent loop of improvement.

Thanks to its Nadcap accredited facility in Morocco, TRONICO is able to provide these solutions at a competitive price.

Electronic assembly and testing for the industry sector
Electronic assembly and testing for the industry sector

Industry – Best-cost manufacturing

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Both manufacturing locations, St Philbert de Bouaine (France) and Tangier (Morocco) use the same process and equipment, both also have the same quality accreditation. The Tangier site is the first to be Nadcap certified on the African continent.

Depending on the customer’s needs and requirements, TRONICO is able to offer manufacturing in France and/or in Morocco.

Activity continuity is ensured thanks to the total compatibility of both locations.

Electronic best-cost manufacturing for the industry sector
Electronic best-cost manufacturing for the industry sector

Industry – Maintainability in Operational Conditions

Equipment lifetime is longer and longer (5 to 20 years, or more), however electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offer global solutions of MOC (Maintaining in Operational Conditions):

Equipment lifetime is longer and longer (5 to 20 years, or more), however electronic components manufacturing cycle tends to be shorter and shorter. Against obsolescence issues (components, process, manufacturing files…), TRONICO offer global solutions of MOC (Maintaining in Operational Conditions):

Maintainability in operational conditions for the industry sector
Maintainability in operational conditions for the industry sector

Industry – TRONICO’s solutions/products

TRONICO pays attention to different markets and develops a product line answering the needs of the industrial market.

Geolocation indoor/outdoor

This solution allows the user to know in real time where a product or an equipment is precisely located, in a defined indoor or outdoor area. The applications of this solution are numorous (dynamic flow management of a manufacturing plant, guidance systems to a target, localisation of manufacturing means, or of pets and so on).

> Know more about TRONICO’s indoor/outdoor geolocation platform

Equipment range extender

This product aims at increasing the battery life of nomad systems for long-term efficiency.

 

TRONICO pays attention to different markets and develops a product line answering the needs of the industrial market.

Geolocation indoor/outdoor

This solution allows the user to know in real time where a product or an equipment is precisely located, in a defined indoor or outdoor area. The applications of this solution are numorous (dynamic flow management of a manufacturing plant, guidance systems to a target, localisation of manufacturing means, or of pets and so on).

> Know more about TRONICO’s indoor/outdoor geolocation platform

Equipment range extender

This product aims at increasing the battery life of nomad systems for long-term efficiency.

 

TRONICO's innovative solutions and products for the industry sector
TRONICO's innovative solutions and products for the industry sector